|
The door mirrors can be electrically adjusted in two directions using a joystick control located in the door controls on the driver's side: a selection cursor makes it possible to choose either the left or the right mirror. The button controls two electrical motors located in each of the two mirrors: one motor allows the rotation of the mirror on the horizontal axis, another on the vertical axis. On the version with folding mirrors, another button controls the folding back of the mirrors if required (for example when trying to get through a narrow space). The circuit receives an ignition-controlled supply and is protected by a dedicated fuse in the Body Computer. The interior rear view mirror is the electrochromic type: i.e. it contains an electronic device which controls the automatic anti-glare function. The automatic anti-glare function is disabled when reverse is engaged. The interior rear view mirror power supply circuit is protected by a fuse in the Body Computer. |
|
The controls on the driver's door H051 include the joystick and control switch for the exterior rear view mirrors. The enablement signal for the controls on the door arrives from pin 14 of connector B of the Body Computer See E3050 ELECTRIC FRONT WINDOWS Control H051 is supplied, at pin 18, by the line protected by fuse F36 of the Body Computer M001; pin 13 of H051 is earthed. Control H051 supplies the motors for mirrors P060 and P061 directly: - the shared motor supply signal leaves pins 14 and 15 of H051; - the vertical movement signal leaves pins 8 and 17 of H051; - the horizontal movement signal leaves pins 6 and 7 of H051. On the version with folding mirrors, the mirrors P060 and P061 have a connector B; pins 1 and 2 receive a positive and negative for the mirror folding motors from pins 10-12 and 11-1 of control H051. The electrochromic mirror P065, pin 6, receives an ignition-controlled supply (INT), from pin 24 of connector F, from the line protected by fuse F49 of the Body Computer M001. The switch for the reversing lights I020 receives a supply controlled by the ignition (INT) from the fuse line F51 of M001. When reverse gear is engaged, the switch closes and sends the control signal to the mirror P065 - pin 6.
|
|
Diagram not captured
../955017942.image The original SVG asset is absent from this archive. The captured text and component links below remain available. Diagram not captured
../955000089.image The original SVG asset is absent from this archive. The captured text and component links below remain available.
|
|
Diagram not captured
../955007062.image The original SVG asset is absent from this archive. The captured text and component links below remain available.
|
