The climate in the vehicle is controlled by means of the duct/distributor and heater unit.

The climate control system is controlled by means of three control knobs in the dashboard:

- the left knob controls the hot and cold air mixing flap via mechanical controls;

- the central knob regulates air ventilation at four different speeds by means of an electrical control;

- the right knob controls the opening of the flaps that regulate the distribution of air flows;

There are 2 buttons above the knobs:

- the first from the right switches on the recirculation function through an electrically controlled motor

- the second button switches on the defrosting of the heated rear windscreen and the door mirrors

  See E3030 REAR WINDOW AND DOOR MIRROR DEFROSTING 

For more details, See descriptions 5020 HEATER

Fan N085 is supplied from a line protected by fuse F83 and relay switch T30 of engine compartment junction unit B001: it is an ignition-operated power supply - start-up excluded (INT/A) controlled by pin 21 of connector C of the Body Computer M001 through the line protected by fuse F31 of M001.

The Body Computer M001 - connector A - receives a direct power supply from the battery through the line protected by maxi fuse F01 of the engine compartment junction unit B001.

The Body Computer M001 receives an ignition-operated (INT) power supply at pin 11 of connector E, whilst the ignition-operated (INT/A) signal reaches pin 1 of connector E.

Pin 9 of connector E of M001 provides the Body Computer with a reference earth.

Control knob H81 controls the fan at different speeds via governor O30: the command signal varies according to the position of the control knob and the resistances of regulator O30 to determine four different voltage signals for the fan N85 which turns at 4 different speeds.

Outside air intake/recirculation flap motor N82 is controlled by a button located in control unit H80: button operation causes an earth signal and electrical supply to be sent to the motor.

The control unit M080 receives an ignition-controlled supply (INT) from the line protected by fuse F51 of M001 and a direct supply from the line protected by fuse F36 of M001.

The lighting of the controls on - with the side lights on - is supplied by the Body Computer M001 - pin 12 of connector B - to the climate control system controls G045 A and B.