Check the front doors are aligned correctly with the wings and rear doors.

Carry out a road test to locate the wind noise, steering sharply to the left and right (to bring the body under torsion), whilst respecting the highway code.

Tape the various areas illustrated in the diagram using bodywork gummed paper.

Repeat the road test, letting the vehicle gradually reach the speeds where the noise starts: if the wind noise persists, check for sealant between the wing and the pillar in the lower area.

Remove the gummed paper from area D and repeat the road test: if the wind noise persists, check the condition of the glass scraper.

    Op. 7005D26 FRONT SIDE DOOR DESCENDING WINDOW GLASS SCRAPER (OUTER) (ONE), LEFT OR RIGHT- R.R

Remove the gummed paper from the rear view mirror area E and repeat the road test: if the wind noise persists, check the condition of the mirror seal.

    Op. 7005R30 ELECTRICALLY CONTROLLED DOOR MIRROR (ONE) - R+R

Remove the gummed paper from area A and repeat the road test: if the wind noise persists, check the condition of the door housing seal in that area and make sure it adheres correctly to the body;

    Op. 7005A34 FRONT SIDE DOOR COMPARTMENT SEAL - R.R

and also check the condition of the bonnet hinge buffer.

Remove the gummed paper from area B and repeat the road test: if the wind noise persists, check the condition of the door housing seal in that area and make sure it adheres correctly to the body.

    Op. 7005A34 FRONT SIDE DOOR COMPARTMENT SEAL - R.R

Remove the gummed paper from area C and repeat the road test. If the wind noise persists, check the condition of the door housing seal in that area and make sure it adheres to the body correctly.

    Op. 7005A34 FRONT SIDE DOOR COMPARTMENT SEAL - R.R

Remove the gummed paper from area F and repeat the road test. If the wind noise persists, check the condition of the door housing seal in that area and make sure it adheres to the body correctly.

    Op. 7005A34 FRONT SIDE DOOR COMPARTMENT SEAL - R.R