ENGINE OIL LUBRICATION SYSTEMThe lubrication system is equipped with an integrated oil filter system known as a green filter. The device is fitted on the oil pump mounting and comprises: - a support containing an oil filter cartridge sealed by a plastic cap; - a heat exchanger.
1. Suction head with filter mesh 2. Oil pump 3. Green filter integrated system 4. Main longitudinal duct 5. Jets (piston skirt cooling) 6. Vertical channel (camshaft mounting lubrication) 7. Oil falling back into sump 8. Switch for oil pressure warning light 9. Turbocharger oil supply pipe 10. Oil return pipe from turbocharger and from oil filter mounting 11. Oil filter cartridge cover The following are found on the integrated oil filter system: the connector for the supply pipe to the turbocharger and the coolant inlet/outlet connectors for the heat exchanger.
1. Thermostat 2. Water pump rigid return pipe 3. Water supply pipe to heat exchanger 4. Water return pipe from heat exchanger 5. Oil return pipe from turbocharger and heat exchanger 6. Water return pipe from turbocharger ENGINE OIL PUMPThe engine oil is drawn in by the sump by means of the vacuum created by the rotation of the gears on the crankshaft. There is a vacuum from the partition (2) for the gears as far as the oil sump suction head. Pressure builds up in all engine oil supply ducts (4) starting from separation partition (2). When the pressure exceeds 6 bar +/- 0.3, the force exerted on the restrictor valve (5) overcomes the reaction of the spring underneath and moves the valve until the connecting duct between the pressure chamber (3) and the low pressure chamber (1) opens limiting the value of the pressure in the circuit.
1. Low pressure chamber 2. Partition 3. Pressure chamber 4. Oil supply duct 5. Pressure limit valve Engine oil pressure restricter valve closed operating position
Engine oil pressure restricter valve short circuit operating position
|