| INTEGRATED RADIO PHONE - DESCRIPTION | INTEGRATED RADIO PHONE - DESCRIPTION OF OPERATION | BUILT-IN RADIO PHONE - WIRING DIAGRAM | INTEGRATED RADIO PHONE - COMPONENT LOCATION | Print electrical function |
FUNCTIONAL DESCRIPTIONThe radio P020 receives a direct battery power supply - pin 44 - through the line for fuse F36 of the Body Computer M001. Pin 43 of P020 is earthed. The CAN reaches pin 12 and 2 of radio P020 and connects it to the Body Computer M001 and the other system nodes. The Body Computer M001 is connected to the radio controls on the steering wheel via the clock spring D047: pin 35 of connector D provides the reference earth at pin 6 of D047; pin 52 of connector D of M001 receives the signals from the buttons to the right of the steering wheel, whilst pin 50 of connector D of M001 receives the signals from the buttons to the left of the steering wheel. The Body Computer M001 - connector A - receives a direct power supply from the battery through the line protected by maxi fuse F01 of the engine compartment junction unit B001. The Body Computer M001 receives an ignition-controlled (INT) power supply at pin 11 of connector E, whilst pin 9 of connector E of M001 provides the Body Computer with a reference earth. The USB port P157, connector B, is connected to the radio P020, connector B; whilst the trim lighting signal reaches pin 8 of connector A. Hands-free microphone P026 is connected to pins 29 and 30 of P020. |