Removing
(
Refitting
)
|
|
Removing
(
Refitting
)
|
|
  |
1. Working from the inside of the tailgate, undo the nuts (1a) via the openings (1b). |
  |
- Lower the tailgate. 1. Apply a double layer of adhesive tape (1a) to the tailgate along the entire front perimeter of the spoiler (1b). 2. Remove the spoiler (1b) releasing the adhesive strip (2a), the retainers (2b) and the centerings (2c) using the special tool.
|
  |
Refitting
(
Removing
)
1. Remove the double layer of adhesive tape (1a) from the tailgate. 2. Clean the entire area where the adhesive tape is stuck and degrease with heptane, then leave to dry. If necessary, retouch the paintwork. 3. Prepare the replacement spoiler (3a). 4. Remove the protective film for the adhesive strips (4a) and place the spoiler (3a) in position immediately attaching the centerings (4b) and the retainers (4c). Stick the adhesive strips (4a) to the tailgate. |
|
|
- Open the tailgate. - Working from the inside of the tailgate, tighten the spoiler fixing nuts via the openings. |
|