Refitting

- Position the vehicle on a lift.

- Raise the vehicle.

- Remove the guards under the engine, if available.

   Op. 7055B56 RIGHT SIDE UNDER-ENGINE PROTECTION/GUARD

1. Working on both sides of the car, disconnect the electrical connections for the fog lights.

1. Working on both sides of the vehicle, undo the front bolts (1a) fixing the front supplementary wheel arches (1b).

2. Release the front part (1b) of the wheel arches from its seat and move them aside.

1. Working on both sides of the vehicle, undo the bolts (1a) fastening the wheel arch to the mudguard (1b).

1. Undo the lower screws (1a) fixing the bumper (1b).

- Lower the vehicle.

1. Undo the upper bolts fixing the bumper.

1. Release the side ends (1a) of the bumper from the seats (1b).

Release the side ends (1a) with caution, to prevent any damage to the seats (1b).

2. Keep the front bumper.

Removing

- Check that the bumper is not damaged.

- Position the bumper and fit it in place attaching it to the side seats.

- Tighten the upper bolts securing the bumper.

- Raise the vehicle.

- Tighten the lower bolts fixing the bumper.

- Tighten the screws fixing the bumper to the wings.

- Position the wheel arches on the bumper and tighten the retaining bolts.

- Connect the electrical connection for the fog light.

- Refit the guards, if installed.

   Op. 7055B55 LEFT SIDE UNDER ENGINE PROTECTION GUARD RR