145 - MiTo   1.4 16v TJet   STUB AXLE FOR ONE REAR WHEEL HUB, LEFT OR RIGHT - R.R WITH HUB REMOVED - INCLUDES BUSH REPLACEMENT IF NECESSARY - CHECK WHEEL GEOMETRY SEPARATELY   4450D14   

Detail     Detail
Removing ( Refitting )

- Position the vehicle on a lift.

Enlarge the image

1. Undo the bolt (1a) and move the ABS wheel rpm sensor (1b) aside.

Enlarge the image

1. Undo the bolts securing the stub axle to the rear suspension crossmember.

2. Remove the stub axle and keep the brake disc guard.

Enlarge the image


 Refitting ( Removing )

1. Place the wheel strut in its housing complete with brake disc guard.

2. Tighten the bolts securing the stub axle to the rear suspension crossmember to the specified torque.

 

Component

 

Fixing

 

dia

 

Value (daNm)

 

Validity

 

Rear wheel strut

 

Screw

 

M12

 

12.3 ÷ 13.6

 


Enlarge the image

1. Place the ABS wheel rpm sensor (1a) in its housing and tighten the bolt (1b) to the recommended torque.

 

Component

  

Fixing

  

dia

  

Value (daNm)

  

Validity
 

Rear wheel rpm sensor

  

Screw

  

M6

  

0.5 ÷ 0.8

  

- Remove the vehicle from the lift.