145 - MiTo   1.4 16v TJet   PUDDLE LIGHTS - FUNCTIONAL DESCRIPTION   E2521   
PUDDLE LIGHTS - DESCRIPTION PUDDLE LIGHTS - FUNCTIONAL DESCRIPTION PUDDLE LIGHTS - WIRING DIAGRAM PUDDLE LIGHTS - COMPONENT LOCATION Print electrical function

FUNCTIONAL DESCRIPTION

The Body Computer M001 receives "door open" input signals at pins 54 (driver's door) and 53 (passenger side door) of connector B of M001.

The two puddle lights G051 and G052 are supplied by Body Computer M1, according to the logic described previously.

The Body Computer M001 - connector A - receives a direct power supply from the battery through the line protected by maxi fuse F01 of the engine compartment junction unit B001.

The Body Computer M001 receives an ignition-operated power supply (INT) at pin 11 of connector E.

Pin 9 of connector E of M001 provides the Body Computer with a reference earth.

Body Computer M001 is connected via the CAN line to instrument panel E050, to which it sends a signal that switches on the "door open" warning light, where necessary, and activates the buzzer to give an acoustic signal.

Lights G051 and G052 are supplied by the Body Computer M1, from pin 20 of connector C, whilst the timed analogue signal arrives from pin 7 of connector B.