145 - MiTo   1.4 16v TJet   CODE - FUNCTIONAL DESCRIPTION   E7010   (GPL, Euro 6)
CODE - DESCRIPTION CODE - FUNCTIONAL DESCRIPTION CODE - WIRING DIAGRAM CODE - COMPONENT LOCATION Print electrical function

APPLIES TO VERSIONS WITH: GPL, Euro 6

FUNCTIONAL DESCRIPTION

The CODE unit is located inside the Body Computer M001 and receives a direct supply - connector A - from the battery via the line protected by maxifuse F01 of the engine compartment junction unit B001.

The Body Computer M001 receives an ignition-controlled power supply (INT) at pin 11 of connector E.

Pin 9 of connector E of M001 provides the Body Computer with a reference earth.

The CODE aerial P091 is connected, via two cables to the CODE unit of M001, to pins 1 and 2 of connector D; the aerial is positioned coaxially on the ignition switch in order to detect the key being inserted and turned.

The key recognition communication and exchange of codes between Body Computer M001 and engine control unit M001 takes place via the C-CAN.

The Body Computer M001 is connected, via the CAN line, to the instrument panel E050 to manage the "CODE failure" warning light.