145 - MiTo   1.4 16v TJet   MULTIFUNCTION SOLENOID VALVE WIRING ON LPG TANK - R.R.   1043A81   

Detail     Detail

APPLIES TO VERSIONS WITH: Euro 5

Removing ( Refitting )

- Place the car on a lift.

APPLIES TO VERSIONS WITH: Euro 5

    Op. 1043A13 LPG TANK COVER - R.R.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Disconnect the electrical connection for the LPG level sensor.

 

 

Denomination

  

Connector
 

1

  

LPG level sensor

  

   See K033 GPL LEVEL SENSOR

2. Disconnect the electrical connection for the LPG intake solenoid valve coil.

 

 

Denomination

  

Connector
 

2

  

LPG supply solenoid valve

  

   See L095 LPG DELIVERY SOLENOID VALVE

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Mark the position and cut the multifunction solenoid valve wiring coupling retaining band.

2. Disconnect the multifunction solenoid valve wiring coupling.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Mark the position and cut the multifunction solenoid valve wiring and LPG pipe retaining bands.

2. Remove the multifunction solenoid valve wiring, releasing it from the LPG tank.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image


 Refitting ( Removing )

1. Place the multifunction solenoid valve wiring back in its housing.

2. Engage the LPG pipes and the multifunction solenoid valve wiring with the bands positioned as shown in the figure.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Connect the multifunction solenoid valve wiring coupling.

2. Engage the multifunction solenoid valve wiring coupling with the band indicated in the figure.

APPLIES TO VERSIONS WITH: Euro 5

- Connect the electrical connection for the LPG level sensor.

- Connect the electrical connection for the LPG intake solenoid valve coil.

APPLIES TO VERSIONS WITH: Euro 5

    Op. 1043A13 LPG TANK COVER - R.R.

APPLIES TO VERSIONS WITH: Euro 5

- Remove the vehicle from the lift.

APPLIES TO VERSIONS WITH: Euro 6

Removing ( Refitting )

- Place the car on a lift.

APPLIES TO VERSIONS WITH: Euro 6

    Op. 1043A13 LPG TANK COVER - R.R.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Detach the electrical connection for the LPG level sensor.

 

 

Name

  

Connector
 

1

  

LPG level sensor

  

   See K033 GPL LEVEL SENSOR

2. Disconnect the electrical connection for the LPG intake solenoid valve coil.

 

 

Name

  

Connector
 

2

  

LPG supply solenoid valve

  

   See L095 LPG DELIVERY SOLENOID VALVE

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Mark the position and cut the multifunction solenoid valve wiring coupling retaining band.

2. Disconnect the multifunction solenoid valve wiring coupling.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Mark the position and cut the multifunction solenoid valve wiring and LPG pipe retaining bands.

2. Remove the multifunction solenoid valve wiring, releasing it from the LPG tank.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image


 Refitting ( Removing )

1. Place the multifunction solenoid valve wiring back in its housing.

2. Engage the LPG pipes and the multifunction solenoid valve wiring with the bands positioned as shown in the figure.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Connect the multifunction solenoid valve wiring coupling.

2. Engage the multifunction solenoid valve wiring coupling with the band indicated in the figure.

APPLIES TO VERSIONS WITH: Euro 6

- Connect the electrical connection for the LPG level sensor.

- Connect the electrical connection for the LPG intake solenoid valve coil.

APPLIES TO VERSIONS WITH: Euro 6

    Op. 1043A13 LPG TANK COVER - R.R.

APPLIES TO VERSIONS WITH: Euro 6

- Remove the car from the lift.