		Test results
1	REEL CHECK	All OK	Problems encountered	Operation
	Check the reel is correctly fitted, ensuring that the reference pin is correctly positioned in its seat on the vehicle body	Go to Step 2	Incorrect installation	Loosen the bolt and position the reference dowel correctly. Retighten the bolt to the recommended torque
2	FOREIGN BODIES CHECK	All OK	Problems encountered	Operation
	Check that there are no foreign bodies inside the system	Go to Step 3	Foreign bodies present	Remove the foreign bodies
3	BELT CHECK	All OK	Problems encountered	Operation
	Check for interference, deformation or dings caused by accidents	Go to Step 4	1. Interference present that makes the belts slide more slowly 2. Presence of deformation or dings on the front anchorage link 3. Presence of deformation or dings on the rear anchorage link 4. Presence of deformations or dings on the front reel/pretensioner 5. Presence of deformations or dings on the rear reel	1. Remove the interference and replace the damaged parts if necessary 2. Replace the front link Op. 7065A14 ANCHORAGE ROD FOR , (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R. 3. Replace the rear link Op. 7065B14 ANCHORAGE ROD FOR (ONE) REAR SEAT BELT LEFT OR RIGHT - R.R. 4. Replace the front seat belt Op. 7065A12 FRONT SEAT BELT (ONE), LEFT OR RIGHT, WITH PRETENSIONER ON REEL - R.R. 5. Replace the rear seat belt Op. 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R.
4	PRETENSIONER OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the pretensioner has not been activated by an accident.If it has, white powder will be seen on the spring case, the reel will be locked and/or the belt deteriorated.	Go to Step 5	Pretensioner found to have been activated	Replace the belt Op. 7065A12 FRONT SEAT BELT (ONE), LEFT OR RIGHT, WITH PRETENSIONER ON REEL - R.R.
5	REEL RELEASE SYSTEM CHECK	All OK	Problems encountered	Operation
	Check reel release by rewinding the belt for a short section and then gently unwinding	Go to Step 6	1. Fault in the front reel release system 2. Fault in the rear reel release system	1. Replace the front seat belt Op. 7065A12 FRONT SEAT BELT (ONE), LEFT OR RIGHT, WITH PRETENSIONER ON REEL - R.R. 2. Replace the rear seat belt Op. 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R.
6	CORRECT COMPONENT INSTALLATION CHECK	All OK	Problems encountered	Operation
	Check right/left component correspondence in relation to the side of the vehicle	End of diagnosis	Incorrect installation	Restore correct installation and replace the parts if necessary

When the belt is fastened and with the vehicle stationary, the belt locks easily and/or remains locked even when movements are not abrupt (e.g. picking up an object).