Contents

		TEST RESULTS
1	FAN CONNECTION CHECK	EVERYTHING OK	PROBLEMS ENCOUNTERED	OPERATION
	With the engine on and engine temperature approximately 90°, or as an alternative, activating the compressor (A/C version), check fan activation and identify the point in contact with the radiator	Go to Step 2	Interference between the fan and the radiator	Eliminate the interference and restore correct operation
2	COOLING MODULE FASTENING CHECK	EVERYTHING OK	PROBLEMS ENCOUNTERED	OPERATION
	Check for the presence of looseness on the fastenings/screws of the duct on the cooling module	Go to Step 3	Looseness on the fastenings of the cooling module	Restore the correct fastenings of the duct on the cooling module
3	COOLING MODULE INTERFERENCE CHECK	EVERYTHING OK	PROBLEMS ENCOUNTERED	OPERATION
	Check whether the fan impeller is in contact with the duct	Go to Step 4	Interference between the impeller and the duct	Replace the impeller assembly Op. 1088B26 AIR DUCT ON RADIANT MASS - R.R.
4	FOREIGN BODIES CHECK	EVERYTHING OK	PROBLEMS ENCOUNTERED	OPERATION
	Check for foreign bodies next to the fan that cause noise	End of diagnosis	Foreign bodies identified next to the fan	Remove the foreign bodies causing the noise