145 - MiTo   1.4 16v TJet   Mechanical noise in the amplifier area   S127   


 

 

 

 

Test results

 

1

 

COMPONENT CONCERNED

 

AMPLIFIER FASTENER CHECK

 

OK (NO FAULTS DETECTED)

 

FAULT DETECTED

 

OPERATION

 

 

Amplifier fasteners

 

Check that the fixing points for the amplifier have been properly tightened: screws, bands, ties, etc...

 

Go to Step 2

 

Incorrect fastening of the amplifier

 

Restore the correct fastening of the amplifier

 

2

 

COMPONENT CONCERNED

 

AMPLIFIER FASTENER CHECK

 

OK (NO FAULTS DETECTED)

 

FAULT DETECTED

 

OPERATION

 

 

Amplifier fasteners

 

Check that there are no cracks or slots between the brackets/mounts touching the surfaces of the amplifier or of the bodywork

 

Go to Step 3

 

Cracks or slots between the brackets/mounts touching the surfaces of the amplifier or of the bodywork

 

Restore the correct fastening of the amplifier by fitting some soft stuffing (foam, rubber, paper) in the relevant areas

 

3

 

COMPONENT CONCERNED

 

AMPLIFIER OPERATION CHECK

 

OK (NO FAULTS DETECTED)

 

FAULT DETECTED

 

OPERATION

 

 

Amplifier

 

Check the correct operation of the amplifier shaking it to find out possible loose objects inside

 

Go to Step 4

 

The amplifier is damaged

 

Replace the amplifier

 Op. 5580T42 BOSE SOUND SYSTEM AMPLIFIER - R.R.

 

4

 

COMPONENT CONCERNED

 

AMPLIFIER OPERATION CHECK

 

OK (NO FAULTS DETECTED)

 

FAULT DETECTED

 

OPERATION

 

 

Amplifier

 

Check the correct operation of the amplifier, finding out contact points or gaps among the different components of the amplifier (holding the amplifier and beating it more times on different points on each side; the response to this movement must be a dull sound, without any vibration).

 

End of diagnosis

 

The amplifier is damaged

 

Replace the amplifier

 Op. 5580T42 BOSE SOUND SYSTEM AMPLIFIER - R.R.