145 - MiTo   1.4 16v TJet   LPG INJECTOR ASSEMBLY INLET LINE - R.R.   1057B65   

Detail     Detail
Removing ( Refitting )

- Drain the sections of pipe from the LPG pressure regulator to the injectors, following the procedure and the instructions below

   Op. 1043A02 LPG SYSTEM LINES PIPE DRAINING OPERATIONS

- Return the car to the workshop (in petrol operation mode).

    Op. 1016A10 SOUND-PROOFING COVER - R.R


Enlarge the image

1. Loosen the band and disconnect the LPG injector unit inlet pipe, LPG filter side.

Enlarge the image

1. Open the retaining clips (1a), loosen the band and remove the injector unit inlet pipe (1b).
Refitting ( Removing )

- Place the LPG injector unit inlet pipe in position, tighten the bands and engage the intermediate retaining clips.

Maintain a distance of 3 - 5 mm between the bands and the ends of the pipe.

    Op. 1016A10 SOUND-PROOFING COVER - R.R

    Op. 1043A04 GPL SYSTEM AND PIPES CHECK FOR LEAKS

APPLIES TO VERSIONS WITH: Euro 5

Removing ( Refitting )

- Drain the sections of pipe from the LPG pressure regulator to the injectors, following the procedure and the instructions below

   Op. 1043A02 LPG SYSTEM LINES PIPE DRAINING OPERATIONS

APPLIES TO VERSIONS WITH: Euro 5

- Return the car to the workshop (in petrol operation mode).

APPLIES TO VERSIONS WITH: Euro 5

    Op. 1016A10 SOUND-PROOFING COVER - R.R

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Open the retaining clips for the LPG injector unit inlet pipe.

2. Undo the nut and remove the LPG filter retaining collar.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Open the band and disconnect the LPG injector unit inlet pipe, LPG filter side.

2. Open the remaining band and remove the LPG injector unit inlet pipe.

APPLIES TO VERSIONS WITH: Euro 5

Refitting ( Removing )

- Place the LPG injector inlet pipe back in its housing and tighten the bands.

Maintain a distance of 3 - 5 mm between the bands and the ends of the pipe.

APPLIES TO VERSIONS WITH: Euro 5

- Place the LPG filter in position.

- Place the LPG filter retaining collar back in it housing and tighten the nut.

- Close the retaining clips for the LPG injector unit inlet pipe.

APPLIES TO VERSIONS WITH: Euro 5

    Op. 1016A10 SOUND-PROOFING COVER - R.R

    Op. 1043A04 GPL SYSTEM AND PIPES CHECK FOR LEAKS

APPLIES TO VERSIONS WITH: Euro 6

Removing ( Refitting )

- Drain the sections of pipe from the LPG pressure regulator to the injectors, following the procedure and the instructions below

   Op. 1043A02 LPG SYSTEM LINES PIPE DRAINING OPERATIONS

APPLIES TO VERSIONS WITH: Euro 6

- Return the car to the workshop (in petrol operation mode).

APPLIES TO VERSIONS WITH: Euro 6

    Op. 1016A10 SOUND-PROOFING COVER - R.R

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Open the retaining clips for the LPG injector unit inlet pipe.

2. Undo the nut and remove the LPG filter retaining collar.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Open the band and disconnect the LPG injector unit inlet pipe, LPG filter side.

2. Open the remaining band and remove the LPG injector unit inlet pipe.

APPLIES TO VERSIONS WITH: Euro 6

Refitting ( Removing )

- Place the LPG injector inlet pipe back in its housing and tighten the bands.

Maintain a distance of 3 - 5 mm between the bands and the ends of the pipes.

APPLIES TO VERSIONS WITH: Euro 6

- Place the LPG filter in position.

- Place the LPG filter retaining collar back in it housing and tighten the nut.

- Close the retaining clips for the LPG injector unit inlet pipe.

APPLIES TO VERSIONS WITH: Euro 6

    Op. 1016A10 SOUND-PROOFING COVER - R.R

    Op. 1043A04 GPL SYSTEM AND PIPES CHECK FOR LEAKS