145 - MiTo   1.4 16v TJet   PRESSURE REGULATOR STOP SOLENOID COIL R R   1043B46   

Detail     Detail
Removing ( Refitting )

   Op. 5530B10 BATTERY - R+R

   Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R


Enlarge the image

1. Disconnect the electrical connection for the cut out solenoid valve on the pressure regulator.

 

 

Description

  

Connector
 

1

  

LPG cut out solenoid valve

  

   See L063 GPL CUT OUT SOLENOID VALVE

Enlarge the image

1. Undo the screw (1a) and remove the cut out solenoid valve coil on the pressure regulator (1b).

Enlarge the image


 Refitting ( Removing )

1. Place the solenoid valve coil in position on the pressure regulator (1a) and tighten the screw (1b) to the prescribed torque.

  

- Connect the electrical connection for the cut out solenoid valve on the pressure regulator.

    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

    Op. 5530B10 BATTERY - R+R

APPLIES TO VERSIONS WITH: Euro 5

Removing ( Refitting )

   Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Disconnect the electrical connection for the cut out solenoid valve on the pressure regulator.

 

 

Denomination

  

Connector
 

1

  

LPG cut out solenoid valve

  

   See L063 GPL CUT OUT SOLENOID VALVE

2. Undo the screw (2a) and remove the cut out solenoid valve coil on the pressure regulator (2b).

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image


 Refitting ( Removing )

1. Place the solenoid valve coil in position on the pressure regulator (1a) and tighten the screw (1b) to the prescribed torque.

  

2. Connect the electrical connection for the cut out solenoid valve on the pressure regulator.

APPLIES TO VERSIONS WITH: Euro 5

    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.

APPLIES TO VERSIONS WITH: Euro 6

Removing ( Refitting )

   Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Disconnect the electrical connection for the cut out solenoid valve on the pressure regulator.

 

 

Name

  

Connector
 

1

  

LPG cut out solenoid valve

  

   See L063 GPL CUT OUT SOLENOID VALVE

2. Undo the screw (2a) and remove the cut out solenoid valve coil on the pressure regulator (2b).

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image


 Refitting ( Removing )

1. Place the solenoid valve coil in position on the pressure regulator (1a) and tighten the screw (1b) to the prescribed torque.

  

2. Connect the electrical connection for the cut out solenoid valve on the pressure regulator.

APPLIES TO VERSIONS WITH: Euro 6

    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.