145 - MiTo   1.4 16v TJet   FITTING BETWEEN INTAKE DUCT AND GPL INJECTORS WITH INJECTORS UNIT REMOVED - R.R.   1057B67   

Detail     Detail
Removing ( Refitting )

- Place the vehicle on a lift.

    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.

    Op. 0010T20 ENGINE COOLANT - CHANGE

    Op. 1088D48 PIPE FROM ENGINE COOLANT RESERVOIR TO TURBOCHARGER - R.R.

    Op. 1057B69 LPG INJECTOR ASSEMBLY SUPPORTING BRACKET - R.R.

    Op. 1072B53 AIR CHAMBER REINFORCEMENT BRACKET - R.R.


Enlarge the image

1. Loosen the band and remove the connector between intake duct and LPG injector.
Refitting ( Removing )

- Place the connector between intake duct and LPG injector in its housing and tighten the band, chamber side.

Maintain a distance of 2 - 3 mm between the band and the end of the connector.

    Op. 1072B53 AIR CHAMBER REINFORCEMENT BRACKET - R.R.

    Op. 1057B69 LPG INJECTOR ASSEMBLY SUPPORTING BRACKET - R.R.

    Op. 1088D48 PIPE FROM ENGINE COOLANT RESERVOIR TO TURBOCHARGER - R.R.

    Op. 0010T20 ENGINE COOLANT - CHANGE

    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE -R.R.

- Remove the vehicle from the lift.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image


 Removing ( Refitting )

1. Loosen the band and remove the connector between intake duct and LPG injector.

APPLIES TO VERSIONS WITH: Euro 5

Refitting ( Removing )

_ Place the connector between intake duct and LPG injector back in its housing and tighten the band, intake chamber side.

Maintain a distance of 2-3 mm between the band and the end of the pipe.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image


 Removing ( Refitting )

1. Loosen the band and remove the connector between intake duct and LPG injector.

APPLIES TO VERSIONS WITH: Euro 6

Refitting ( Removing )

_ Place the connector between intake duct and LPG injector back in its housing and tighten the band, intake chamber side.

Maintain a distance of 2-3 mm between the band and the end of the pipe.