145 - MiTo   1.4 16v TJet   LPG/G SWITCH   1057B20   

Detail     Detail
Removing ( Refitting )

- Disconnect the negative battery terminal.

Enlarge the image

1. Release the petrol/LPG switch from the dashboard trim.

Enlarge the image

1. Disconnect the electrical connection (1a) for the petrol/LPG selection switch (1b) and remove it.

 

 

Description

  

Connector
 

1a

  

LPG/petrol switch

  

   See H094 PETROL / GPL SWITCH
Refitting ( Removing )

- Connect the electrical connection for the LPG/petrol switch.

- Remove the protection from the double-sided tape in the lower surface of the LPG/petrol switch.

- Place the LPG/petrol switch in its housing pressing on its edges, so that it sticks to the dashboard trim.

The LPG/petrol switch is installed correctly when the vertical bar for LPG level is on the door side.

- Connect the negative battery terminal.

APPLIES TO VERSIONS WITH: Euro 5

Removing ( Refitting )

- Disconnect the negative battery terminal.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Working at the points indicated in the figure, release the LPG/petrol selection switch complete with dashboard trim panel.

APPLIES TO VERSIONS WITH: Euro 5


Enlarge the image

1. Disconnect the electrical connection (1a) for the LPG/petrol selection switch (1b) and remove it complete with panel.

 

 

Denomination

  

Connector
 

1a

  

LPG/petrol switch

  

   See H094 PETROL / GPL SWITCH

APPLIES TO VERSIONS WITH: Euro 5

- Release the LPG/petrol selection switch from the panel.

APPLIES TO VERSIONS WITH: Euro 5

Refitting ( Removing )

- Engage the LPG/petrol selection switch with the panel.

- Connect the electrical connection for the LPG/petrol switch.

- Place the LPG/petrol selection switch back in its housing and engage it with the dashboard trim.

APPLIES TO VERSIONS WITH: Euro 5

- Connect the negative battery terminal.

APPLIES TO VERSIONS WITH: Euro 6

Removing ( Refitting )

- Disconnect the negative battery terminal.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Working at the points indicated in the figure, release the LPG/petrol selection switch complete with dashboard trim panel.

APPLIES TO VERSIONS WITH: Euro 6


Enlarge the image

1. Disconnect the electrical connection (1a) for the LPG/petrol selection switch (1b) and remove it complete with panel.

 

 

Name

  

Connector
 

1a

  

Petrol/LPG switch

  

   See H094 PETROL / GPL SWITCH

APPLIES TO VERSIONS WITH: Euro 6

- Release the LPG/petrol selection switch from the panel.

APPLIES TO VERSIONS WITH: Euro 6

Refitting ( Removing )

- Engage the LPG/petrol selection switch with the panel.

- Connect the electrical connection for the LPG/petrol switch.

- Place the LPG/petrol selection switch back in its housing and engage it with the dashboard trim.

APPLIES TO VERSIONS WITH: Euro 6

- Connect the negative battery terminal.