TEST RESULTS
1
CHECKS USING DIAGNOSTIC EQUIPMENT
ALL OK
PROBLEMS ENCOUNTERED
ACTION
Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket and check the following, in order:
ยท presence of faults in the CAN
Move on to Step 2
Presence of faults in the B-CAN
Restore the correct connections at the nodes involved.
2
ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT
Using the diagnostic equipment, carry out the active diagnosis for the activation of the LED.
End of diagnosis
The LED is not activated
Replace the LED
When the alarm is activated, the control LED does not switch on.
