		TEST RESULTS
0	PRELIMINARY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	First check: · charge of the remote control battery in the key; · correct key, i.e., the remote control is activated	Move on to Step 1	1. Remote control battery run down 2. Key not correct	1. Replace the remote control battery 2. Connect the diagnostic equipment to the diagnostic socket and programme the remote control correctly
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	- Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket and check the following, in order: · presence of faults in the CAN · presence of faults in the alarm system	Move on to Step 2	1. Presence of faults in the CAN 2. Error detected in the alarm system	1. Continue following the instructions on the diagnostic equipment 2. Continue following the instructions on the diagnostic equipment
2	CORRECT OPERATION CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the body computer is working properly	End of diagnosis	Body Computer defective	Replace the Body Computer Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.

When the alarm is activated using the remote control:

• the control LED does not flash;

• the doors do not open/shut;

• the lights do not flash;

• the siren does not sound

The acoustic signals and the flashing of the direction indicators may or may not be activated depending on the provision for the various countries.