Refitting

1. Using the internal controls, tilt the reflector (1a) downwards to the end of travel position.

2. Insert a plastic blade (2a) between the reflector (1a) and the shell (2b) in the area illustrated, then rotate the blade in the direction of the arrows (2c) and release the retainers (2d) for the reflector from the motor circular support (2e).

1. Disconnect the electrical connections for the reflector defroster.

2. Keep the reflector.

Removing

- Check that the reflector is not damaged.

- Connect the electrical connections for the reflector defroster.

- Position the reflector and attach the retainers to the motor circular support.

- Check that the reflector is working.