145 - MiTo   1.4 16v TJet   DECELERATION SENSOR FOR AIR BAG (ONE), L/H OR R/H - R+R   5580C10   

Detail     Detail

APPLIES TO VERSIONS WITH: until 09/2010

Removing ( Refitting )

Before removing and refitting the sensor the following preliminary operations must be carried out.

- Turn the ignition key to the OFF position and extract it.

- Disconnect the battery.

   Op. 7055B56 RIGHT SIDE UNDER-ENGINE PROTECTION/GUARD

   Op. 7055B55 LEFT SIDE UNDER ENGINE PROTECTION GUARD RR

   Op. 7210E10 R.R. FRONT BUMPER

   Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER

APPLIES TO VERSIONS WITH: until 09/2010


Enlarge the image

1. Undo the screw (1a) securing the sensor (1b).

APPLIES TO VERSIONS WITH: until 09/2010


Enlarge the image

1. Move the sensor (1a) releasing the reference (1b) from the housing (1c).

2. Keep the spacer.

3. Disconnect the electrical connection.

 

 

Name

  

Connector
 

3

  

AIRBAG FRONT SENSOR

  

   See K039 FRONT AIR BAG SENSOR

4. Keep the sensor.

APPLIES TO VERSIONS WITH: until 09/2010


Enlarge the image


 Refitting ( Removing )

- Check that the sensor is not damaged.

- Connect the electrical connection.

- Place the sensor and spacer in position, engaging the reference in the housing.

1. Tighten the screw.

 

Component

 

Fixing

 

dia

 

Value (daNm)

 

Validity

 

Airbag front sensor

 

Screw

 

M6

 

0.6 รท 1.0

 

APPLIES TO VERSIONS WITH: until 09/2010

    Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER

    Op. 7210E10 R.R. FRONT BUMPER

    Op. 7055B55 LEFT SIDE UNDER ENGINE PROTECTION GUARD RR

    Op. 7055B56 RIGHT SIDE UNDER-ENGINE PROTECTION/GUARD

- Use an Examiner to check that the system has not acquired errors during the operation.