Refitting

   Op. 5570T80 CAR RADIO EQUIPMENT - R+R

1. Unscrew the bolts.

2. Remove the radio mounting.

Removing

- Check that the radio mounting is not damaged.

- Position the radio mounting.

- Screw in the bolts.

   Op. 5570T50 BLUETOOTH ELECTRONIC CONTROL UNIT MOUNTING - R.R.

Refitting

- Disconnect the negative battery terminal.

Op. 5580M16 TRIM FOR ON BOARD NAVIGATOR - R.R.

1. Extract the metal radio navigator mount (1a) and remove it by lifting the retainers (1b) marked red.

1. Undo the fixing screws (1a) and remove the plastic radio navigator mount (1b).

Removing

- Check that the component is intact and working, otherwise replace it.

- Fit the metal radio navigator mount in position and lower the retainers.

- Fir the plastic radio navigator mount in position and tighten the fixing screws.

Op. 5580M16

- Connect the negative battery wire terminal.