	Description	Connector
1a	LEFT FRONT DOOR LOCK GEARED MOTOR	See N050 DRIVER'S FRONT DOOR LOCK GEARED MOTOR
1a	RIGHT FRONT DOOR LOCK GEARED MOTOR	See N051 RIGHT FRONT DOOR LOCK GEARED MOTOR
1b	DRIVER'S FRONT ELECTRIC WINDOW MOTOR	See N060 DRIVER'S FRONT ELECTRIC WINDOW MOTOR
1b	RIGHT FRONT ELECTRIC WINDOW MOTOR	See N061 RIGHT FRONT ELECTRIC WINDOW MOTOR
1c	DRIVER'S SIDE DOOR MIRROR	See P060 DRIVER'S DOOR MIRROR
1c	PASSENGER SIDE DOOR MIRROR	See P061 PASSENGER DOOR MIRROR

- To disconnect the electrical connection (1a), lift up the retainer (1d) using a screwdriver (1e).

1. Disconnect the electrical connection for the door.

	Description	Connector
1	LEFT FRONT DOOR COUPLING	See D030 LEFT FRONT DOOR COUPLING
1	RIGHT FRONT DOOR COUPLING	See D031 RIGHT FRONT DOOR COUPLING

2. Disconnect the partition seal from the door frame.

3. Release the wiring retainers from the door frame.

4. Extract the wiring by withdrawing it from the front section.

Refitting ( Removing

)

- Check that the wiring is not damaged and that the individual conductors are correctly fastened to the connections.

- If necessary, carry out continuity tests.

- Position the wiring and fit the duct seal to the door frame.

- Connect the wiring retainers.

- Connect the electrical connections.