Refitting

1. Apply a double layer of adhesive bodywork tape (1a) around the perimeter of the windscreen washer jet (1b).

Extract the windscreen washer jet (1b) releasing the inner retainers (1c) using the special tool.

2. Disconnect the pipe from the windscreen washer jet.

3. Keep the windscreen washer jet.

- Check that the screen washer jet is not damaged.

- Remove the adhesive tape.

- Connect the pipe to the windscreen washer jet.

- Place the windscreen washer jet in position and attach the retainers.

- Check that the windscreen washer jet is working.