Test results

Check whether the telephone is cable of connecting via Bluetooth(r) to other systems such as other mobile phones, earphone systems or computers.

Move on to Step 2

The telephone is not capable of dialogue even with other Bluetooth(r) systems

The problem is inherent to the phone: the customer must contact a mobile phone service centre

Check, in the User Data menu, that not more than four telephones are registered and that the telephone in question is one of these

Move on to Step 4

1. Not more than four telephones are registered but the telephone in question is not one of these

2. Five telephones are registered and the telephone in question is not included

1. Register the telephone

2. Move on to Step 3

Following the instructions in the Owner's Handbook, delete all the telephones registered in the system, then start the registration process again, checking that the outcome is positive

End of diagnosis

The fault persists

Move on to Step 5

Following the instructions in the Owner's Handbook, register the telephone in question, checking that it is successful.

During the registration procedure, an enablement code, shown in the instrument panel, will need to be entered in the telephone

End of diagnosis

The fault persists

Move on to Step 5

Carry out the Bluetooth network disconnection active diagnosis on the Bluetooth® system and check whether the fault disappears

End of diagnosis

The fault persists

If there is a Bluetooth® system update CD, carry out

 See Test 5570TP BLUETOOTH® SOFTWARE UPDATE PROCEDURE

otherwise replace the Bluetooth® control unit

 Op. 5570T49 BLUETOOTH ELECTRONIC CONTROL UNIT - R.R.