| MAIN BEAM HEADLAMPS - DESCRIPTION | MAIN BEAM HEADLAMPS - FUNCTIONAL DESCRIPTION | MAIN BEAM HEADLAMPS - WIRING DIAGRAM | MAIN BEAM HEADLAMPS - COMPONENT LOCATION | Print electrical function |
DESCRIPTIONThe vehicle is equipped with two high beams in the headlamps. The main beams are switched on by the steering wheel interface: - with the dipped beams on, by pushing the lever towards the dashboard (stable mode) - in flashing mode, by pulling the lever toward the steering wheel (unstable mode) The switching on of the main beam headlamps is managed by the Body Computer. A dedicated relay in the engine compartment junction unit controls the activation of the main beams via a line protected by a dedicated fuse. The dipped beam activation relay is controlled by the Body Computer: relay energizing is activated via a specific stalk unit control signal. Activation and/or deactivation information is sent via the CAN: in this way, the main beam warning light is activated in the instrument panel. |