Contents

		Test results
1	CHECK ON MATCHING BETWEEN HEAD RESTRAINT RODS AND PLASTIC BUSHES	All OK	Problems encountered	Operation
	Check for clearance between the head restraint rods and plastic bushes	Move on to Step 2	Clearance between the head restraint rods and plastic bushes	Replace the bushes Op. 7050B08 GUIDE BUSH FOR HEAD RESTRAINT (ONE) FOR REAR SEAT - R.R
2	CHECK ON MATCHING BETWEEN PLASTIC BUSH AND METAL SEAT	All OK	Problems encountered	Operation
	Check for clearance between the plastic bush and the metal seat in the backrest frame	Move on to Step 3	Clearance between the metal pipe and plastic bush	Replace the plastic bush (or increase the outer diameter using insulating tape) Op. 7050B08 GUIDE BUSH FOR HEAD RESTRAINT (ONE) FOR REAR SEAT - R.R
3	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Replace the left backrest Op. 7050A13 SPLIT REAR SEAT LEFT BACKREST - R.R. Replace the right backrest Op. 7050A15 SPLIT REAR SEAT RIGHT BACKREST - R.R.

Noise from head restraint whilst driving