Contents

		Test results
1	STEERING COLUMN FASTENING CHECK	All OK	Problems encountered	Operation
	Check the fastening of the steering column: it should not be slack	Move on to Step 2	Steering column slack	Restore the correct fastening
2	AXIAL CLEARANCE CHECK	All OK	Problems encountered	Operation
	Check the axial clearance of the steering column: it should not be excessive	Move on to Step 3	Excessive clearance	Restore the correct clearance, fastening the pin. If necessary, replace the steering Op. 4120A10 STEERING BOX - R+R - CHECK WHEEL TOE-IN IF NECESSARY SEPARATELY
3	SPIDER CLEARANCE CHECK	All OK	Problems encountered	Operation
	Check that there is no clearance between the steering column link spiders	Move on to Step 4	Spider clearance	Replace the link Op. 4110B10 STEERING LINKS - R+R ON VEHICLE - CHECK TOE-IN/TOE-OUT SEPARATELY
4	COAXIAL LINK CLEARANCE CHECK	All OK	Problems encountered	Operation
	Check that there is no clearance at the collapsible link	Move on to Step 5	Link clearance	Replace the link Op. 4110B10 STEERING LINKS - R+R ON VEHICLE - CHECK TOE-IN/TOE-OUT SEPARATELY
5	RACK CLEARANCE CHECK	All OK	Problems encountered	Operation
	Check the rack clearance by rotating the steering to the end of travel position: it should not be excessive	Move on to Step 6	Rack bush clearance too large	Replace the steering box Op. 4120A10 STEERING BOX - R+R - CHECK WHEEL TOE-IN IF NECESSARY SEPARATELY
6	STEERING LINK CLEARANCE CHECK	All OK	Problems encountered	Operation
	Check the steering link clearance: it should not be excessive	Move on to Step 7	Excessive clearance	Replace the steering box Op. 4120A10 STEERING BOX - R+R - CHECK WHEEL TOE-IN IF NECESSARY SEPARATELY
7	STEERING BOX FASTENING CHECK	All OK	Problems encountered	Operation
	Check the fastening of the steering box: it should not be slack	End of diagnosis	Fastening loose	Tighten the pins to torque