		Test results
1	LOCK STRIKER CHECK	All OK	Problems encountered	Operation
	Check that the striker fastening is correct	Move on to Step 2	Incorrect striker fastening	Restore the correct striker fastening Op. 7005A10 FRONT SIDE DOOR - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY
2	DOOR CONTROLS CHECK	All OK	Problems encountered	Operation
	Check that the door opens/closes correctly by operating the: Key Exterior handle Interior handle	Move on to Step 3	1. Lock faulty 2. Faults in the exterior handle 3. Faults in the interior handle	1. Move on to Step 5 2. Move on to Step 3 3. Move on to Step 4
3	EXTERIOR HANDLE CHECK	All OK	Problems encountered	Operation
	Check the condition of the exterior handle	Move on to Step 4	Exterior handle defective	Replace the exterior handle Op. 7005C11 FRONT SIDE DOOR EXTERIOR HANDLE - R.R
4	INTERIOR HANDLE CHECK	All OK	Problems encountered	Operation
	Check the condition of the interior handle	Move on to Step 5	Interior handle defective	Replace the interior handle
5	LOCK FASTENING CHECK	All OK	Problems encountered	Operation
	Check that the lock is correctly fastened to the door	Move on to Step 6	Fault in lock fastening	Restore the correct fastening of the lock Op. 7005N21 FRONT SIDE DOOR LOCK MOTOR/LOCK ASSEMBLEY FOR ONE DOOR, LEFT OR RIGHT - R.R.
6	LINKS CHECK	All OK	Problems encountered	Operation
	Check the control and/or safety links are correctly fastened to the lock and handle	End of diagnosis	1. Control rods not correctly attached 2. Safety link attachment not correct.	1. Restore the correct fastening of the control links Op. 7005C41 FRONT SIDE DOOR EXTERIOR HANDLE LOCK CONNECTION LINK - R.R 2. Restore the correct fastening of the safety link

When the door lock is operated with the key or remote control or from the interior, one of the front doors does not close properly.

If one door does not close correctly when the door lock is operated, the two doors may close and reopen after a few seconds.