		Test results
1	CUSHION FASTENINGS CHECK	All OK	Problems encountered	Operation
	Check that the cushion is correctly fastened to the vehicle floor	Move on to Step 2	Cushion not correctly fastened to the vehicle floor	Retighten the cushion to the vehicle floor to the correct torque
2	CHECK ON MATCHING BETWEEN CUSHION UPHOLSTERY AND VEHICLE INTERIOR TRIM	All OK	Problems encountered	Operation
	Check the matching of the cushion upholstery and the vehicle interior trim (wheel arch liners, door panels, etc.)	Move on to Step 3	Interference from trims	Reposition the trims and/or carry out the correct cushion fitting cycle
3	CUSION HINGE MOVEMENT CHECK	All OK	Problems encountered	Operation
	Check that the cushion hinges move freely	Move on to Step 4	Interference with foreign objects (e.g. carpet)	Eliminate the causes of the interference
4	HINGE CONDITION CHECK	All OK	Problems encountered	Operation
	Check the condition of the cushion hinges (and the centre ones for split seats) and make sure they conform	End of diagnosis	1. Centre hinged pin distorted 2. Matching with interference betwen pin and seat in hinges	1. Replace the centre pin 2. Replace the cushion Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.

Folding over difficult, creaking when folding over