145 - MiTo   1.4 16v TJet   GENERAL FAILURE WARNING LIGHT NOT WORKING   K158   
 

 

 

Test results
 

1

  

CHECK USING DIAGNOSTIC EQUIPMENT

  

All OK

  

Problems encountered

  

Operation
 

 

Connect the diagnostic equipment and check the operation of the general failure warning light in active diagnosis at the INSTRUMENT PANEL NODE

  

End of diagnosis

  

The warning light is not activated

  

Replace the Instrument Panel

 Op. 5560B10 CONTROL PANEL - R+R

The following functions cause the activation of the general failure warning light:

- Inertia switch (FIS) operation

- Windscreen wiper automatic operation not available

- Parking sensor failure (if fitted)

- Dusk sensor failure (if fitted)

- Engine oil pressure sensor failure

- Brake pad wear

- Rain sensor failure (if fitted)

- Exterior lights failure: side light, number plate light, rear fog lamp, direction indicator, brake light

- Pollution filter blocked (JTD version only)

Even if one of the functions signalled by the general failure warning light is faulty, the warning light in the instrument panel does not come on