TEST RESULTS

With the ignition ON, operate all the lights using the steering wheel interface, namely:

· Dipped beam headlamps, using the selector wheel

· Main beam headlamps, using the lever (both fixed and flashing positions)

· Direction indicators, using the lever (right and left)

and check that they are activated

Move on to Step 1

1. The dipped beam headlamps are not working

2. The main beam headlamps are not working

3. The direction indicators do not work on both sides

4. The direction indicators do not work on one side only

1. Continue as indicated

 See table I005 DIPPED HEADLAMPS NOT WORKING

2. Continue as indicated

 See table I006 MAIN BEAM HEADLAMPS NOT WORKING

3. Continue as indicated

 See table I010 DIRECTION INDICATORS / HAZARD WARNING LIGHTS NOT WORKING

4. Continue as indicated

 See table I012 LEFT OR RIGHT DIRECTION INDICATORS NOT WORKING

Connect the diagnostic equipment and check the operation of the warning lights in the INSTRUMENT PANEL NODE by means of active diagnosis

End of diagnosis

The warning lights do not come on

Replace the Instrument Panel

 Op. 5560B10 CONTROL PANEL - R+R