		Test results
1	HEADLAMP ALIGNMENT ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check: - connection between left control panel and NQS; - left control panel earth - connection between Dashboard Control Unit and instrument panel See E3080 HEADLAMP AGLINMENT CORRECTOR	Move on to Step 2	1. Connections not correct 2. Earths defective	1. Restore the correct connections 2. Repair the earth contacts
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that all the display segments are working properly at the Instrument Panel in active diagnosis	End of diagnosis	One or more segments not working	Replace the instrument panel Op. 5560B10 CONTROL PANEL - R+R

When the buttons which control the headlamp alignment are operated (with the dipped headlamps on) the information in the display does not change. If the headlamp alignment is not working

See table I080 HEADLAMP ALIGNMENT CORRECTOR NOT WORKING