0	PRELIMINARY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check: That the panel brightness adjustment has not been selected. That the mode button has not been pressed That failure messages have not been displayed	Move on to Step 1	Display shows other information	Restore display conditions using the control panel
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner to the diagnostic socket. Check that there are no faults in the instrument panel	Move on to Step 2	Errors present	Continue following the instructions provided by the diagnostic equipment
2	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Keeping the Examiner equipment connected to the diagnostic socket, check the operation of the display by activating the Autotest function in active diagnosis.	Move on to Step 3	Milometer not working	Replace the instrument panel Op. 5560B10 CONTROL PANEL - R+R
3	ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the connections between the instrument panel, Body Computer and ABS control unit See E4010 INSTRUMENT PANEL	End of diagnosis	Wiring defective	Repair/replace the wiring.

While driving, the milometer does not work or works irregularly.

The speedometer is working properly. If the speedometer is also not working properly