Refitting

- Open the bonnet.

1. Undo the bolts securing the lock.

2. Move the lock (2a) slightly aside and disconnect retainer (2b) and then the end retainer (2c) from the control cable (2d).

3. Keep the lock (2a).

Removing

- Check that the lock is not damaged.

1. Connect the connection cable (1a) to the end terminal (1b) and the the retainer (1c) of the lock.

2. Position the lock.

3. Screw in the lock retaining bolts without tightening them.

4. Adjust the position of the lock.

The arrows indicate the possible movements.

5. Tighten the lock retaining bolts to the recommended torque.

- Check that the bonnet lid opens and closes properly.