Refitting

   Op. 7055B55 LEFT SIDE UNDER ENGINE PROTECTION GUARD RR

1. Disconnect the electrical connection for the lamp.

2. Rotate the cover and move it (bayonet fitting).

1. Disconnect the electrical connection for the bulb.

1. Release the bulb retaining clips.

2. Extract the bulb.

If the bulb is working properly, avoid touching it with your hands. If this does happen, clean the bulb with alcohol.

Removing

- Check the condition of the bulb and make sure that it is clean.

Avoid touching the bulb with your hands: If this does happen, clean the bulb with alcohol.

1. Fit the bulb in place.

The bulb must be arranged as shown in the figure.

2. Do up the bulb retaining clips.

- Connect the electrical connection for the bulb.

- Insert the cover and turn it into position.

- Connect the electrical connection for the headlamp.

    Op. 7055B56 RIGHT SIDE UNDER-ENGINE PROTECTION/GUARD