Refitting

- Open the bonnet.

1. Release the rubber cover (1a) from the headlamp.

1. Rotate and extract the bulb holder (1a) (bayonet fitting).

2. Extract the dipped beam bulb (2a) from its seat on the bulb holder (1a).

If the bulb is working properly, avoid touching it with your hands. If this does happen, clean the bulb with alcohol.

Removing

- Check the condition of the bulb and make sure that it is clean.

Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.

1. Fit the dipped headlamp bulb (1a) in the bulb holder (1b). The correct position for the bulb is illustrated.

2. Fit and turn the bulb holder in its seat.

- Insert the rubber cover of the headlamp.

- Close the bonnet.

- Check that the bulb is working.