Refitting

- Open the tailgate.

1. Cut along the precut line (1a) of the boot side panel.

2. Move the edge (2a) of the trim.

1. Rotate and extract the bulb holder (bayonet fitting).

2. Remove the bulb from the bulb holder (bayonet fitting).

Removing

- Check the condition of the bulb and make sure that it is clean.

- Fit the bulb in the bulb holder.

- Fit the bulb holder in the lamp.

- Arrange the edge of the boot side panel.

- Close the tailgate.

- Check that the rear light are working.