Removing
(
Refitting
)
1. Using a suitable tool, release the protective cover (1a) from the alternator pulley (1b).
|
|
Removing
(
Refitting
)
1. Using a suitable tool, release the protective cover (1a) from the alternator pulley (1b). |
  |
1. Using the special tool in the seat (1a), stop the rotation of the pulley (1b), then undo the pulley fixing bolt (1c).
2. Remove the alternator pulley. |
|
|
Refitting
(
Removing
)
- Check that the alternator pulley is not damaged. - Place the pulley in position. - Screw in the pulley locking bolt, stop the rotation using the special tool and tighten the bolt. - Fit the protective cover on the pulley. |