Refitting

1. Remove protective cover (1a) for the electronic part of the alternator, releasing the three retainers (1b).

1. Undo the nut (1a), remove the flexible washer (1b) and the bush (1c).

2. Undo the nut (2a) and keep the washer (2b).

1. Undo the two bolts (1a) and remove voltage regulator (1b).

Removing

- Check that the voltage regulator is not damaged.

1. Working on the voltage regulator, release the cover (1a) from the guides, releasing the retainer (1b).

1. Clean the armature on the alternator thoroughly.

1. Place the voltage regulator (1a) in position attaching the blades (1b) to the armature (1c).

1. Fit the cover (1a) until plate until the retainer (1b) is attached.

- Tighten the bolts securing the voltage regulator.

- Position the washer and tighten the nut.

- Position the bush and flexible washer, then tighten the nut.

- Fit the protective cover for the electronic part of the alternator in place and attach the three retainers.