Removing
(
Refitting
)
 | This procedure is valid only for the 120 HP version. |
|
|
Removing
(
Refitting
)
|
|
|
- Place the car on a lift. |
|
|
|
|
|
- Disconnect the rear exhaust pipe and move it to one side, referring to |
|
|
  |
1. Open the clip (1a) and release the gear selection/engagement cables (1b). |
  |
1. Disconnect the gear engagement/selection cables. 2. Retract the cursors and remove the gear selection/engagement cables from the reaction bracket. |
|
|
Refitting
(
Removing
)
- Connect the gear engagement/selection cables to the reaction bracket. - Connect the gear engagement/selection cables to the relevant levers on the gearbox. - Engage the gear engagement/selection cables in the retaining clip. |
|
|
|
- Connect the rear exhaust pipe, referring to |
|
|
|
|
|
|
- Remove the vehicle from the lift. |
|
|
Removing
(
Refitting
)
|
|
|
|
|
|
- Disconnect the rear exhaust pipe and move it to one side, referring to |
|
|
  |
1. Open the clip (1a) and release the gear selection/engagement cables (1b). |
  |
1. Disconnect the gear engagement/selection cables. 2. Open the clips and remove the gear selection/engagement cables from the reaction bracket. |
|
|
Refitting
(
Removing
)
- Connect the gear engagement/selection cables to the reaction bracket. - Connect the gear engagement/selection cables to the relevant levers on the gearbox. - Engage the gear engagement/selection cables in the retaining clip. |
|
|
|
- Connect the rear exhaust pipe, referring to |
|
|
|
|