|
Carry out the measurement with all the emission control devices active and at the specified idle speed. |
- Insert the probe of an exhaust gas analyser into the end of the exhaust pipe for at least 30 cm.
|
|
If the shape of the exhaust tailpipe will not allow the probe to be fully introduced, add an extension that ensures a seal in the join area. |
- Wait for the exhaust gas analyser indices to stabilise.
- With the engine idling, check that the CO2 level is within specified limits.
|
Measurement |
Value |
Validity |
|
CO2 emissions (according to the European Directive in force) (g/km) |
153 |
1.4 16V TJet 155 HP |
|
Measurement |
Value |
Validity |
|
CO2 emissions (according to the European Directive in force) (g/km) |
145 |
1.4 16V TJet 120 HP |
|
Measurement |
Value |
Validity |
|
CO2 emissions (according to European Directive in force) (LPG version) (g/km) |
131 |
1.4 16V TJet 120 HP |