		Test results
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node: - that there are no faults	Move on to Step 3	No. plate lights short circuitd to earth or open circuit	Move on to Step 2
2	ELECTRICAL SYSTEM CHECK	All OK	Problems encountered	Operation
	Also check the condition of the right or left bulb(s) involved - Check the continuity and insulation of the wiring between the connections at the Body Computer and the number plate light connector or the right or left wiring involved - Check the continuity and efficiency of the number plate light earth - Check the condition of the number plate light internal circuit See E2010 SIDE LIGHTS / NO. PLATE LIGHTS	Move on to Step 3	1. Bulbs inefficient 2. Connection between Body computer and number plate light connector open circuit or short circuit 3. Earth interrupted or inefficient 4. Open circuit or short circuit	1. Replace the bulbs or bulb 2. Restore the electrical connection See E2010 SIDE LIGHTS / NO. PLATE LIGHTS 3. Restore the electrical connection See E2010 SIDE LIGHTS / NO. PLATE LIGHTS 4. Replace the light Op. 5540A94 (ONE) NUMBER PLATE LIGHT - R.R.
3	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Keeping the Examiner diagnostic equipment connected, check the operation of the number plate lights in active diagnosis	End of diagnosis	No lights come on	Replace the body computer Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.

the number plate lights are switched on separately (right and left) by the Body Computer Node when the Side Lights on or Parking Lights (four lights) on signals are received.