		Test results
1	HANDBRAKE ADJUSTMENT CHECK	All OK	Problems encountered	Operation
	Check that the handbrake is correctly adjusted	Move on to Step 2	Adjustment incorrect	Restore the correct handbrake adjustment Op. 3380A04 HANDBRAKE - ADJUST TRAVEL
2	CONTROL CABLES CHECK	All OK	Problems encountered	Operation
	Check: - that the handbrake control cables are correctly fastened; - the condition of the cables.	Move on to Step 3	1. Cable fastening slack. 2. Cables damaged or broken. 3. Link damaged or broken	1. Restore correct fastenings 2. Replace the cables involved Op. 3380A30 HANDBRAKE CABLE - R+R 3. Replace the links involved
3	BRAKE CALLIPER CHECK	All OK	Problems encountered	Operation
	Check the condition of the rear brake caliper pistons	Move on to Step 4	Pistons worn or seized	Replace the rear brake calliper involved Op. 3310B36 REAR BRAKE CALIPER (ONE), LEFT OR RIGHT - R.R
4	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the problem starting from another symbol

When the handbrake is operated the rear wheels are not locked. (A handbrake that is working properly should, when fully engaged, prevent the "take off" of the vehicle from stationary)