		Test results
1	STARTER MOTOR CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check the connections between battery, ignition switch and starter motor See E5010 STARTING AND RECHARING Check if the maxi fuse in the battery control unit has blown	Go to Step 2	Connections not correct	Restore the battery connections See E5010 STARTING AND RECHARING
			Earth lead damaged	Replace the lead
			Lead between battery and starter motor damaged	Replace the lead
			Maxi fuse blown	Replace the maxi fuse after having ascertained the cause of the problem
2	IGNITION SWITCH CHECK	All OK	Problems encountered	Operation
	Check the condition of the ignition switch and that it is working properly	Go to Step 3	Ignition switch faulty	Repair or replace the ignition switch Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R
3	STARTER MOTOR CHECK	All OK	Problems encountered	Operation
	Check the condition of the starter motor and that it is working properly	End of diagnosis	Fault in the starter motor	Overhaul the starter motor
		End of diagnosis	Fault in the starter motor that cannot be repaired	Replace the starter motor Op. 5520B10 STARTER MOTOR - R.R.

		TEST RESULTS
1	STARTER MOTOR CONNECTIONS CHECK	ALL OK	PROBLEMS ENCOUNTERED	OPERATION
	Check the connections between the battery, alternator and starter motor; see wiring diagram See E5010 STARTING AND RECHARING	Go to Step 2	Connections not correct.	Restore the correct connections.
2	STARTER MOTOR RELAY POWER SUPPLY CHECK	ALL OK	PROBLEMS ENCOUNTERED	OPERATION
	- Check the connection between the switch and relay	Go to Step 3	No continuity.	Using a Tester, check whether the lack of continuity is between the switch and the engine compartment control unit or between the engine compartment control unit and the motor relay; see wiring diagram See E5010 STARTING AND RECHARING If the lack of continuity is in the junction unit, replace the junction unit Op. 5505A28 CONTAINER FOR ADDITIONAL JUNCTION UNIT IN ENGINE COMPARTMENT - R.R. otherwise, repair the cable concerned by the fault.
3	IGNITION SWITCH CHECK	ALL OK	PROBLEMS ENCOUNTERED	OPERATION
	Check the operation and the condition of the switch. Operate the switch	Go to Step 4	Ignition switch faulty.	Replace the switch Op. 5520A18 IGNITION SWITCH CONTACT CARRIER LOCK BARREL - R.R.
4	STARTER MOTOR CHECK	ALL OK	PROBLEMS ENCOUNTERED	OPERATION
	Check the condition of the starter motor and that it is working properly See Test 5520BB STARTER MOTOR OPERATION CHECK	End of diagnosis	Fault in starter motor.	Replace the starter motor Op. 5520B10 STARTER MOTOR - R.R.

When the key is turned to the MAR position, the instruments light up; in the AVV position, the starter motor does not turn.

When the key is turned to the MAR position, the instruments light up but the starter motor does not turn.