145 - MiTo   1.4 16v TJet   CHECK ON ELECTRICAL SYSTEM CURRENT ABSORPTION WITH NO LOAD   5530BD   

Before carrying out the test, check that all the courtesy lights are off and all the vehicle electrical loads being examined are switched off and that the power latch stage of the engine management control unit is over.
 

STEP

  

CHECK TO BE PERFORMED

  

REMEDIAL ACTION IF THE CHECK IS NOT OK
 

1

  

No load absorption check

Disconnect the negative battery lead and replace it with the terminal for sensor EX-03 (1) using the EX-01 adaptor cable

Connect the sensor to the Examiner and check that the maximum absorption is not more than 36 mA.

  

Check for any dispersions in the system or identify any consumers that are losing current