145 - MiTo   1.4 16v TJet   TYRE PRESSURE MONITORING SYSTEM - FUNCTIONAL DESCRIPTION   E7060   
TYRE PRESSURE MONITORING SYSTEM - DESCRIPTION TYRE PRESSURE MONITORING SYSTEM - FUNCTIONAL DESCRIPTION TYRE PRESSURE MONITORING SYSTEM - WIRING DIAGRAM TYRE PRESSURE MONITORING SYSTEM - COMPONENT LOCATION Print electrical function

FUNCTIONAL DESCRIPTION

Control unit M047 is supplied at pin 1 directly from the battery from a line protected by fuse F36 of Body Computer M001.

The ignition-operated power supply (INT) reaches pin 16 via the line protected by fuse F49 of the Body Computer M001.

The control unit is earthed at pin 10.

The CAN line connected to the Body Computer M001 leaves from pins 8 and 9 of M047.

The Body Computer M001 - connector A - receives a direct power supply from the battery through the line protected by maxi fuse F01 of the engine compartment junction unit B001.

The Body Computer M001 receives an ignition-operated power supply (INT) at pin 11 of connector E.

Pin 9 of connector E of M001 provides the Body Computer with a reference earth.

The four receivers for the sensors P012 receive a 5 V power supply from pin 2 of M047 and a reference earth from pins 12, 13 and 15; they send a pressure signal to pins 3, 4, 5 and 6 of M047.