Removing
(
Refitting
)
- Position the vehicle on a lift.
|
|
Removing
(
Refitting
)
- Position the vehicle on a lift. |
|
|
|
|
|
|
  |
1. Loosen the band and disconnect the upper coolant inlet hose to the radiator, thermostat side. |
  |
1. Undo the bolts (1a) and move the engine coolant reservoir (1b) to one side. |
  |
1. Disconnect the rapid connector for the radiator upper coolant inlet hose, radiator side and remove it. |
  |
1. Loosen the band (1a) and disconnect the rapid connector (1b) from the upper radiator coolant inlet hose (1c). |
|
|
Refitting
(
Removing
)
- Connect the rapid connector to the radiator upper coolant inlet hose and tighten the band. - Place the radiator coolant upper inlet hose in position and connect the rapid connector, radiator side. - Connect the radiator upper coolant inlet hose, thermostat side, and tighten the band. - Fit the engine cooling supply reservoir in place and secure it to the front end using the bolts. |
|
|
|
|
|
|
|
|
- Remove the vehicle from the lift. |