Removing
(
Refitting
)
|
|
Removing
(
Refitting
)
|
|
|
  |
1. Open the retaining clip (1a), loosen the band (1b) and disconnect the oil vapour supply pipe to the turbocharger intake (1c), oil vapour separator side. |
  |
1. Loosen the band (1a) and disconnect the oil vapour supply pipe to the air intake chamber (1b), oil vapour separator side. |
  |
1. Undo the engine oil vapour separator (1b) fixing bolt (1a). |
  |
1. Undo the remaining bolt (1a) and remove the engine oil vapour separator (1b). |
|
|
Refitting
(
Removing
)
- Refit the oil vapour separator and tighten the bolts. - Connect the oil vapour supply pipe to the air chamber, oil vapour separator side and tighten the band. - Connect the oil vapour supply pipe to the turbocharger intake, oil vapour separator side, close the retaining clip and tighten the band. |
|
|
|
|